Y-type diverter valve
Y-type diverter valve

Y-type diverter valve

ZSD

The single-channel Y-type diverter valve is used mainly for diverting the bulk material flow in pneumatic dense phase and dilute phase conveying systems.

Your request

Contact reason *

Title *

Surname

Address

Street & Streetnumber
Zip
City
Country

Kontaktinformationen

z.B. +49

Y-type diverter valve

The single-channel Y-type diverter valve is used mainly for diverting the bulk material flow in pneumatic dense phase and dilute phase conveying systems.

Characteristics

  • Available in five sizes (150–350)
  • Can be used in pneumatic dense phase conveying systems and dilute phase conveying systems thanks to its optimized conveying channel
  • Continuous circular cross-section prevents impact forces during pneumatic dense phase conveying
  • Can be used as a distributor and collector diverter valve without any structural changes
  • Sealing concept with static and inflatable sealing
  • Possible to subsequently change the entire actuator from the left-hand side of the drive and vice versa
  • Clearly visible optical position indicator
  • Direct monitoring of the internal rotor position by means of proximity sensors
  • Low maintenance outlay
  • Housing and internal rotor made from high-quality cast aluminum as standard, hard-coated
  • Internal rotor with high-quality stainless steel pipe inserts
  • Static seals mounted in the internal rotor as standard
  • 2x45° deflection angle (symmetrical)
  • Operating pressure between -1.0 bar and 6.0 bar (g), mechanical design pressure -1.0 to 10 bar (g)
  • High temperature resistance between -20 and +120°C (operational and mechanical design temperature)
  • Flange joints bored in accordance with DIN 2501 PN10 FF or ANSI 150 lbs FF
  • Declaration of incorporation or declaration of conformity in accordance with the Machinery Directive, EC type examination certificate and declaration of ATEX conformity available